润滑与密封

作者：倪莎，马希直

单位：南京航空航天大学机电学院,,南京航空航天大学机电学院,

关键词：真空离子镀; TiN/ Ti 涂层; 摩擦因数; 耐磨减摩

TiN/ Ti film was sprayed on 304 stainless steel substrate by vacuum ion plating,the film thickness is 3 μm. The basic mechanical properties of coating were analyzed by hardness tester, three-dimensional topography tester and scratch tester. The friction and wear properties of the coated samples were analyzed by a ball-disc tester,and the effect of TiN/ Ti coating on the wear resistance and friction reduction properties of the substrate surface was studied according to the test results of the bump foil bearing performance test bench. The results show that the hardness of TiN/ Ti coating can reach HV1 500,which is 5. 5 times of that of base material. The average friction coefficient of TiN/ Ti coating is 0. 23,which is 68% lower than that of base material,and its wear loss is only 18. 75% of that of base material. The maximum friction mo- ment of GCr15 against PTFE is 2. 4 N·mm,while that of TiN/ Ti is only 1 N·mm,only 41. 7% of GCr15. TiN/ Ti coating exhibits excellent load-carrying capacity,properties of wear resistance and friction reduction.

来源：2020年第3期

《润滑与密封》期刊编辑部

查看润滑与密封杂志2020年第3期